Engine Diagnostic Mode (Self-Diagnostic)
How to enter self-diagnostic mode (Level 1)
1. From the service menu, select [Printer Maintenance] and [Engine Diag. Mode] to enter
the self-diagnostic mode.
2. When the screen enters the self-diagnostic mode (Level 1), the "DIAGNOSTIC
MODE” is displayed.
Press either (2) key or (8) key to move to the respective self-diagnostic items.
(Menu item scrolls when either (2) key or (8) key is pressed.)
00.06.06 = PU Firmware Version
S-Mode = Shipping Mode
Press the (6) key to execute the selected test. Exit the test by pressing the (4) key.
27
To Next Page
Loading...
