Display Setting Operation Function
ENABLE To detect TONER SENSOR
DISABLE Not to detect
Sets Enable/Disable of
the toner sensor
operation
ENABLE To check BELT UNIT
CHECK__ENABLE
DISABLE Not to check
Sets Enable/Disable of
the belt installation
check job.
ENABLE To check ID UNIT CHECK
DISABLE Not to check
Sets Enable/Disable of
the ID installation check
job.
ENABLE To detect UP/DOWN SENSOR
DISABLE Not to detect
Sets Enable/Disable of
the ID UP/DOWN
sensor operation
ENABLE To stop REG ADJUST ERROR
DISABLE Not to stop
Sets Enable/Disable of
the error stop caused by
the color registration
error detected value.
Stop To prolong life DRUM OVER LIFE
Continuance
Not to prolong
life
To prolong or not to
prolong the drum life
when it reaches the
lifetime.
LED Head Serial Number Display
Not used for servicing the MFP at this time.
Fuse Check Method
45
To Next Page
Loading...
