Chapter 1 Maintenance Procedures – Printer
1.1 Exterior Cleaning
Clean inside and outside of the printer with a clean dry cleaning cloth and small vacuum cleaner as
required.
Note! Be careful not to touch the image drum terminals, the LED lens array and the LED head
connectors.
1. Turn OFF the power of the MFP.
Select “Setup” then “Shutdown”. Follow the on screen prompts. When shutdown is complete,
turn off the power switch on the printer.
2. Clean the surface of MFP.
3
Note! Do not use any liquid other than water and neutral detergent.
The MFP requires no lubrication.
Do not lubricate the unit.
Clean the surface of the unit with a clean
cloth wrung out using clean water or
neutral detergent.
Clean surface of the unit with soft clean cloth.
To Next Page
Loading...
Need help?
General
