Sensor Location Table for the RADF
Sensor Description
PI 10 Cover open/close sensor
PI 11 Document set sensor
PI 16 Delivery reversal sensor
PI 17 Read sensor
PI 18 Registration paper sensor
4.1.2 Jam Removal Procedure
Front Cover Block (Code: 372, 380, 390, 391, 400)
Open the front cover. If either top end or rear of a jammed paper is visible, draw out the
jammed paper gently with care. When code 400 occurs, jammed paper may be unloaded
automatically sometime. In such a case, open and close the front cover. The MFP can be
recovered from the error.
#1
#3
#2
65
To Next Page
Loading...
