Paper Jam Code Table for the print engine
Code Number Jam Location Related Sensors
370
Duplex reversal DUP-IN, DUP-R
371
Duplex input DUP-F, DUP-R
372
Feed error at Duplex IN1
373
Multi-feed in Duplex Unit DUP-B
380
Feed IN2, WR
381
Transport IN1, IN2, WR, Fuser-IN, EXIT
382
Exit EXIT, Fuser-IN
383
Duplex entry EXIT, DUP-IN, DUP-R
385
Around Fuser Unit Fuser thermister
390
Feed error at front feeder IN2, WR
391
Tray1 IN1
392
Tray2 2nd-IN
400
Paper size error IN1
Diagram showing paper detection sensors in the RADF
Note! The RADF detects a jam using the sensors shown above. Document jam check
timings are stored in the ROM on the Main PCB to check whether a jam has occurred
according to presence/absence of the document at the relevant sensor position.
There are no jam codes generated for the RADF
64
To Next Page
Loading...
