Oki MC-860 / CX2633MFP - Consumable Item Counter Display

2.7.6 Consumable Item Counter Display
This self-diagnostic menu is used to display the consumption status of the consumable items.
1. Enter the self-diagnostic mode and press the (2) key or (8) key until
[CONSUMABLE STATUS] is displayed on the screen.
Press the (6) key to execute.
The (2) key increments the test item and (8) key decrements the test item.
2. When the (2) key or (8) key is pressed, consumption status of the consumable items
are displayed in order. Pressing the (*) key or the (#) key is invalid.
When the (4) key is pressed, the screen exits the test. (Screen returns to the item 1
condition.)
Display Unit of Measure Details
K-ID UNIT Images
Y-ID UNIT Images
M-ID UNIT Images
C-ID UNIT Images
Number of rotations up to the
present time since the new ID
UNIT for each color has been
installed is displayed after
the data is converted to the
equivalent value of A4, 3Page/
Job.
FUSER UNIT Prints Number of sheets up to the
present time since the new
FUSER unit has been installed.
TR BELT UNIT Images Number of sheets up to the
present time since the new Belt
UNIT has been installed.
K-TONER (FULL) Percentage
Y-TONER (FULL) Percentage
M-TONER (FULL) Percentage
C-TONER (FULL) Percentage
Amount of consumption of the
respective color toners are
displayed.
M-WASTE TNR CNT Times
C-WASTE TNR CNT Times
Amount of waste toner is
displayed.
* When it reaches 32 times, the
Waste toner FULL is issued.
K-STC MODE CNT Times
Y-STC MODE CNT Times
M-STC MODE CNT Times
C-STC MODE CNT Times
Number of printed character dot
counts for the respective toners
are displayed. (Accumulative
value since the MFP has started
running.)
K OVER RIDE CNT Times
K OVER RIDE CNT Times
K OVER RIDE CNT Times
K OVER RIDE CNT Times
Accumulative number of times
of the toner cartridges for
respective colors are displayed.
42