<< When BLT REFLECT RSLT is executed >>
The key operations when BLT REFLECT RSLT is executed The key operations are the
same as those above.
When the (4) key is pressed, the screen exits the test. (Screen returns to the item 1 condition.)
Color registration correction test items
Display Details
REG ADJ EXECUTE
Execution of color registration error
correction
REG ADJ RESULT
Referring to the result of color registration
error correction
BLT REFLECT TEST
Execution of color registration error
correction belt reflectance Good/Bad
Judgment
BLT REFLECT RSLT
Referring to the result of color registration
error correction belt reflectance
Good/Bad judgment
2.7.5 Density Error Correction Test
This self-diagnostic menu is used to test the density error correction function of the MFP.
1. Enter the self-diagnostic mode (Level 1) and press the (2) key or (8) key until
[TEST PRINT] is displayed in the top of the screen.
2. When the (6) key is pressed, the following message is displayed.
Press the (2) key or (8) key until the desired item is displayed.
3. When the (6) key is pressed, test of the item that is being displayed on the panel
is implemented.
40
To Next Page
Loading...
