Initialization Functions Service Engineer Page 4
*2 Only the setups that change their initial values depending on destination or counter
code are initialized.
*3. [Filename (standard)] and [E-mail edit fixed phrase] under the menus [Scanner
function] - [E-mail setting] are initialized.
*4 When HDD Disable is set, only administrator can log on.
(Because the access control mode setup values is stored in Flash, but the user information
is not stored in HDD.)
*5 When destination is changed from Japan (such as "JP1","JPOEM") to overseas (such
as “ODA”), the portions in which Japanese language has been input are cleared. When
the profile name is Japanese language, the parameters excluding character string are
initialized at the same time.
52
To Next Page
Loading...
