Troubleshooting > 122
5. Holding it by its top centre, lift the cyan image drum, complete with its toner
cartridge, up and out of the printer.
6. Put the cartridge down gently on to a piece of paper to contain any toner spillage.
7. Repeat this removal procedure for each of the remaining image drum units.
8. Look into the printer to check whether any sheets of paper are visible on any part of
the belt unit.
CAUTION!
The green image drum surface is very delicate and light sensitive.
Do not touch it and do not expose it to normal room light for more
than 5 minutes. If the drum unit needs to be out of the printer for
longer than this, please wrap the cartridge inside a black plastic
bag to keep it away from light. Never expose the drum to direct
sunlight or very bright room lighting.
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General
