Faxing
> 92
8. Select a type of F code box:
> Bulletin Box - refer to “Registering an F code Bulletin box” on page 92
> Confidential Box - refer to “Registering an F code confidential box” on page 92.
Registering an F code Bulletin box
1. Press OK to select Bulletin Box.
2. Press the Right arrow key to select Box Name.
(a) Using the arrow keys and on screen keyboard, enter a box name.
(b) Highlight Enter and press OK.
3. Using the Down arrow, scroll to Sub-Address and press the Right arrow key.
(a) Using the keypad enter the sub address.
(b) Highlight Enter and press OK.
4. Press OK to complete.
Registering an F code confidential box
1. Press OK to select Confidential Box.
2. Press the Right arrow key to select Box Name.
(a) Using the arrow keys and on screen keyboard, enter a box name.
(b) Highlight Enter and press OK.
3. Using the Down arrow, scroll to Sub-Address and press the Right arrow key.
(a) Using the keypad enter the sub address.
(b) Highlight Enter and press OK.
NOTE
If using one-byte characters, up to 16 characters can be registered.
NOTE
A sub address can be registered using up to 20 digits. Numbers, # and * can
be registered.
If you make a mistake when entering the digits, press the Clear button to
delete and then enter the correct digit.
NOTE
If using one-byte characters, up to 16 characters can be registered. If using
double-byte characters, up to 8 characters can be registered.
NOTE
A sub address can be registered using up to 20 digits. Numbers, # and * can
be registered.
If you make a mistake when entering the digits, press the Clear button to
delete and then enter the correct digit.
To Next Page
Loading...
Need help?
General
