Oki MC780fx - Using the Multi-Purpose Tray (MPT); MPT Loading and Configuration

- 64 -
How to Load the Paper
1
2
4
5
6
3
Using the Multi-Purpose Tray
(MPT)
Use the multi-purpose tray (MPT) when
you want to print on plain paper, postcards,
envelopes, OHP lm, or labels. The side you
want to print on should be placed face up. After
loading the paper, congure its size, type, and
thickness by using the operator panel.
1
Hold the multi-purpose tray (MPT)
on both sides, and fold it down.
Multi-Purpose
Tray (MPT)
2
Pull the folded paper support
forward between manual guides.
3
Pull the paper support out.
Paper Support
Multi-Purpose
Tray (MPT)
4
Adjust the manual guides to t the
paper width.
Multi-Purpose
Tray (MPT)
Manual Guide
Manual Guide
5
Press down the back of the multi-
purpose tray.
6
With the side you want to print on
facing up, insert the edge of the
paper into the back of the multi-
purpose tray (MPT).
Note
•
Loaded paper should not exceed the [

] mark on the
manual guide. You can load up to 100 pages at 82g/
m
2
.
7
Push the blue set button.
Set Button
(Blue)
Note
•
Do not mix papers of different size, type, or
thickness.
•
When adding paper to the multi-purpose tray, take
out any paper already inserted, then add the extra
paper and realign the paper into a tidy stack.
•
Curled or warped postcards or envelopes may cause
misfeeds. Try to use material that is not curled. Any
curl of 2 mm or more should be corrected.
•
Do not place any material on the multi-purpose tray
other than paper for printing. Do not use excessive
force when raising or pushing the multi-purpose tray.