- 33 -
Installing Additional Tray Units
1
2
4
5
6
3
•
Installing Additional Tray Units
Installing additional tray units will increase the amount of paper you can load. You can install a
maximum of three additional trays. One tray can hold 550 sheets of paper at 64 g/m2. By adding
an extra tray to the standard tray and the multi-purpose tray, you can print up to 2300 pages
continuously.
Memo
•
The additional trays are called “Tray 2”, “Tray 3” and “Tray 4”.
Additional Tray Unit Spacer Caster unit
Model Name:N31440A
Caster unit
Screws (22)Anti-tip Foot
Cover (2)
Anti-tip Foot
Rear (2)
Anti-tip Foot
Cover (2)
Anti-tip Foot
(2)
Anti-tip Foot
Side (2)
Note
•
Up to three tray units can be added to the equipment
without the Inner Finisher. For the equipment with the
Inner Finisher, up to two tray units including the spacer
can be added.
•
Place the spacer under the additional tray unit.
May cause injury!
•
To use the Additional Tray, always use the
Caster Unit, and make sure to attach the
anti-tip feet and joint parts.
1
Open the box and remove the
additional tray. Remove the
cushioning and protective materials.
2
Turn OFF the power to the machine,
and remove the power cord and
cables.
Note
•
If you leave the power ON, you may damage the
machine.
& For details about how to turn OFF the machine, see
“Turning Power OFF” (P.52).
To Next Page
Loading...
