Oki Microline 490

32 Microline 490/491 User’s Guide
Menu Settings Table (Continued)
Group Item Settings (Defaults are set in bold italic)
Setup (cont.) Operator Panel Function Full Operation, Limited Operation
Reset Inhibit No, Yes
Print Suppress Effective No, Ye s
Auto LF No, Yes
Auto CR* No, Yes
CSF Bin Select† Bin 1, Bin 2
SI Select Pitch (10 cpi)* 15 cpi, 17.1 cpi
SI Select Pitch (12 cpi)* 12 cpi, 20 cpi
Time Out Print Valid, Invalid
Auto Select No, Yes
Graphics Speed Low, High
Centering Position DEFAULT, MODE 1, MODE 2
CSF Type Wide, Narrow
Power Saving Enable, Disable
Power Save Time 5 min, 10 min, 15 min, 30 min, 60 min
* Appears only when the IBM emulation is selected.
† Appears only when optional Cut Sheet Feeder is installed.