29
Load The Paper (Standard Configuration)
Figure 21. Feeding the Paper Through the Paper Slot
Pedestal Model
a. Place the paper supply on the floor in front of the printer, or
on the optional paper shelf, if attached.
b. Ensure that the paper pulls freely from the box.
NOTE: Be sure the paper feeds between the two wire guides.
2. Hold the paper in place with one hand (to prevent it from
slipping down through the paper slot) while pulling it through
from above with your other hand.
3. Pull the paper above and behind the ribbon mask, which is a
silver metal strip.
Paper
Slot
Cabinet Model Pedestal Model
Paper Slot
Metal Paper Guide
(MX1200 or
MX1200+ only)
Wire
Guide (2)
To Next Page
Loading...
Need help?
General