Print A Test Page
58
Congratulations! You have unpacked the printer, loaded ribbon and
paper, and printed a test page. The next step is to configure the
printer for use with the host computer. Everything you need to know
about configuring the printer is in the User's Manual, which is on the
CD-ROM that comes with this booklet.
8. Press until the desired
option displays.
9. The configuration listing
begins to print, then the
printer goes back offline.
10. Carefully tear off the configuration printout.
11. Locks the ENTER key.
12.
13. Store the printout in a safe place. The printer is ready for operation.
Step Press Result Notes
UNTIL
Print Config.
All
ENTER
OFFLINE
QUICK SETUP
+
ENTER SWITCH
LOCKED
ON LINE/CLEAR
ONLINE
To Next Page
Loading...
