Oki ML4410 User Manual

Operation 17
English
Reset Inhibit
No
; Yes
Print Suppress
Ye s
; No
Auto LF
No
; Yes
Auto CR (IBM mode only)
No
; Yes
Print DEL Code (Oki mode only)
No
; Yes
SI Pitch (10) (IBM mode only)
17.1 CPI
; 15 CPI
SI Pitch (12) (IBM mode only)
12 CPI
; 20 CPI
Time Out Print
Va l i d
; Invalid
Auto Select
No
; Yes
ESC SI Pitch (IBM mode only)
17.1 CPI
; 20 CPI
Intr Chr Sub st (Epson mode only)
Combined
; Code Page Only
Host Interface
Auto Interface
; Parallel; Serial; Oki HSP (only when
MUPIS card is fitted)
I/F Time Out
15 sec
; 30 sec; 45 sec; 1 min; 2 min; 3 min; 4 min; 5
min
Default Path
Current Path
; Rear Path; Front Path
Auto Path
Invalid
; Valid
Impact Mode
Normal
; Quiet; Hi-Copy
LF Speed
Fast
; Slow
Width Control
Invalid
; Mode 1; Mode 2
Parallel I/F I-Prime
Buffer Print
; Buffer Clear; Invalid
Pin 18
+5v
; Open
Auto Feed XT (Epson mode only)
Invalid
; Valid
Bi-Direction
Disable
; Enable
Serial I/F Parity
None
; Odd; Even
# Serial Bits
8 Bits
; 7 Bits
Protocol
Read/Busy
; X-ON/X-OFF
Diagnostic Test
No
; Yes
Busy Line
SSD-
; SSD+; DTR; RTS
Baud Rate
9600 BPS
; 4800 BPS; 2400 BPS; 1200 BPS; 600
BPS; 300 BPS; 19200 BPS; 38400 BPS
DSR Signal
Valid
; Invalid
DTR Signal
Rdy on Pwr Up
; Ready on Select
Busy Time
200 ms
; 1 sec
OKI HSP Only when MUPIS card is fitted and depends on
which MUPIS card is fitted.
Group Item Setting

Oki ML4410 Specifications

General

Brand	Oki
Model	ML4410
Category	Printer
Language	English