Epson FX Mode 49
English
Epson FX Mode
This section gives the commands that are required to control printing
features if Epson FX mode is selected. Some of these commands are
common to IBM mode and these common commands are listed below for
reference:
Features Command
Double width SO/DC4/ESC W
Emphasised ESC E/F
Enhanced ESC G/H
Super/subscripts ESC S/T
Underlining ESC -
Form length ESC C
FF FF
6/8 LPI ESC 2/0
Line spacing ESC A/J/3
Skip over perforation ESC O/N
HTABS HT/ESC D
VTABS ESC B/VT
CR CR
LF LF
Paper out on/off ESC 8/9
Clear buffer CAN
Uni/bidirectional printing ESC U
Unidirectional (1 line) ESC <
Backspace BS
Print suppress off DC1
Cut Sheet Feeder ESC EM I/R/1/2
Graphics ESC K/L/Y/Z
15CPI ESC g
To Next Page
Loading...
Need help?
General
