- 75 -
Printer Maintenance
3
Remove the flange.
4
Turn the roll paper holder knob in the
direction of the arrow to narrow the
shaft of the roll paper holder.
5
Remove the roll paper.
6
Use Wiper moistened with cleaning fluid
(isopropyl alcohol) to wipe any dirt off
the sides of the flange and Side-Guide-
8Inch.
Side surface
Flange
Side surface
Side-Guide-
8Inch
7
Mount the roll paper.
Reference
z
Refer to the "User's Guide" regarding how to mount
the roll paper.
8
Press up on the tension bar open lever
until it clicks.
To Next Page
Loading...
