- 76 -
Printer Maintenance
9
While restraining the tension bar with
one hand, use Wiper moistened with
cleaning fluid (isopropyl alcohol) to
wipe, in one direction, the dirt off the
tension bar (
①
).
Use the hand that is restraining the
tension bar to rotate it (
②
) as you
finish cleaning each side, until the
entire tension bar is clean.
10
While rotating the guide-side-roller-F,
use Wiper moistened with cleaning fluid
(isopropyl alcohol) to wipe any dirt off
the sides and corners of the guide-side-
roller-F.
Guide-Side-Roller-F
11
Press down on the tension bar open
lever until it clicks.
12
Lower the unwinder cover open lever to
open the unwinder cover.
Note
z
Securely open the unwinder cover so it does not
close while cleaning.
To Next Page
Loading...
