Oki Pro1040 - Page 77

- 77 -
Printer Maintenance
13
If there are scraps of paper or glue
from the labels on the sheet guide, use
Wiper moistened with cleaning fluid
(isopropyl alcohol) to wipe it off.
14
Use Wiper moistened with cleaning
fluid (isopropyl alcohol) to wipe, in one
direction, the dirt off the sheet guide.
15
Move the roll paper guide to confirm
that there is no glue or paper scraps
on it. If there are scraps of paper or
glue from the labels on it, use Wiper
moistened with cleaning fluid (isopropyl
alcohol) to wipe it off.
Roll paper guide adjustment knob
Roll paper guide
16
If there are scraps of paper or glue
from labels on the ends of the sheet
guide, undo the screw and remove the
unwinder paper guide.
Unwinder paper guide
17
Use Wiper moistened with cleaning fluid
(isopropyl alcohol) to wipe the dirt off
the sides of the unwinder paper guide
and ends of the sheet guide.
End of the sheet guide
Side of the unwinder paper guide
18
Install the unwinder paper guide and
secure the screw.
19
Turn the screws in two locations on the
F0 roller unit to loosen them.