pro920WT User’s Guide> 150
A
PPENDIX
B – M
ENU
SYSTEM
The top-level Functions menus are:
> Configuration
> Print Information
> Menus
> Admin Setup
> Calibration
The two other special top-level menus are:
> Boot Menu
The following tables summarise the Configuration, Print Information
and Menus menu trees and provide some usage examples. The
menu trees are given to the lowest menu item level. Typically, this
can be a parameter that can be set by selecting from a range of
values provided or a command that can be executed to display or
print a status or setting value.
Emboldened values followed by an (A) denote default values
associated with locations where A4 is default paper size.
Emboldened values followed by an (L) denote default values
associated with locations where Letter is default paper size.
Emboldened values followed by neither (A) nor (L) denote common
defaults.
Certain menus and items associated with, for example, the printer
hard disk appear only if the associated hardware is installed or under
certain conditions.
The remainder of the menus above are intended for more specialized
usage and are not described further here. For full details of using all
menus to configure and use the printer, refer to the Network and
Configuration Guide.
To Next Page
Loading...
