Oki pro920TW - Page 161

pro920WT User’s Guide> 161
Low Toner Continue
Stop
Sets the printing
operation when
insufficient toner is
detected.
Continue: the printer
can continue printing
while remaining
online.
Stop: the printer
stops printing and
goes offline.
Jam Recovery On
Off
On: continues
printing the job,
including any jammed
pages, once the jam
has been cleared.
Off: Cancels a job
including the page
currently jammed.
Error Report On
Off
On: prints an error
report during the
occurrence of an
internal error. This
item is valid only for
PS.
Print Position
Adjust
X Adjust 0.00
+0.25 – +2.00
-2.00 – -0.25
millimeter
Adjusts the position
of the whole printing
image (0.25 mm
interval)
perpendicular to the
direction of paper
movement (i.e.
horizontally).
Y Adjust 0.00
+0.25 – +2.00
-2.00 – -0.25
millimeter
Adjusts the position
of the whole printing
image (0.25 mm
interval) parallel to
the direction of paper
movement (i.e.
vertically).
ITEM VALUE DESCRIPTION