EasyManua.ls Logo

Olimpia splendid UNICO EASY S1 - 3.4 APPLIANCE OPERATING MODES

Olimpia splendid UNICO EASY S1
180 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
UNICO EASY S1
ENGLISH
EN - 17
Ifthebatteryliquidfallsontotheskinorclothes,washwellwithcleanwater.Do
notusetheremotecontrolwithbatteriesthathaveleaked.
Thechemicalproductscontainedinthebatteriescancauseburnsorotherrisks
to health.
3.3.c - Location of the remote control
Keep the remote control in a position from which the signal can reach the receiver (24) of the appliance
(maximumdistanceisapprox.8metres-withchargedbatteries)(gure24).
The presence of obstacles (furniture, curtains, walls, etc.) between the remote control and the appliance
reduces the remote control range.
3.4 USE OF THE APPLIANCE
Work as follows in order to use the appliance.
Topreventpossibledamagestothecompressor,eachstartisdelayedby3minutes
with respect to the last switching off.
3.4.a Preliminary operations
• Placetheapplianceonastableandnotinclinedbase,atatleast30cm.from
thewallorfromanyotherobject,inordertoensurethecorrectaircirculation.
Placeitonawater-resistantsurfacesincethepossiblewaterleakagecould
damagefurnitureortheoor.
• Donotplacetheappliancedirectlyoncarpets,towels,blanketsorotherabsor-
bent surfaces.
• Insertthepluginthepowersocket;theapplianceemitsa“beep”,onthedisplay
appears the icon
andtheenvironmenttemperaturein°C.
Beforeelectricallyconnectingtheappliance,makesuretheplatedatacorrespond
tothoseoftheelectricitydistributionnetwork.
3.4.b Appliance switching on/o󰀨
a. To start the appliance, press the key “ON/OFFon the remote control or the key
on the control panel.
b. A beep signals that the appliance is operating.
c. The icon
switches on on the control panel.
d. appears on its display
appears on its display.
e. In case of prolonged stop of the appliance, it must be reset by removing the plug from the power socket,
wait 5÷10 seconds and then reinsert it; a beep signals that the appliance is ready for use.

Table of Contents

Related product manuals