ENGLISH
EN - 18
3.5 AUTO MODE (Automatic)
a. When this mode is selected, the appliance automatically activates the COOLING, HEATING (only for
version with heat pump) or FAN functions depending on the environment temperature and on the set one.
The environment temperature is continuously checked to obtain an optimal comfort in the air conditioned
room.
b. This mode can be selected by pressing the key “MODE” once or more (on the remote control or on the
controlpanel)untilwhenthespeciciconECO and Blue Air is shown on the display of the control panel
and/or when the icon Auto appears on the remote control display.
c. It is not possible to select the fan speed in AUTO mode.
3.6 COOLING MODE (COOL)
a. Whenthismodeisselected,theappliancedehumidiesandcoolstheenvironment.
This mode can be selected by pressing the key “MODE” once or more (on the remote control or on the
controlpanel)untilwhenthespecicicon
appears on the display.
b. In this mode, the fan is always switched on and it is possible to select its desired speed by pressing the
key “FAN” on the remote control or the key
on the control panel.
The fan speed is displayed as indicated in paragraphs “3.1” (point SW7) and “3.2” (point B3).
c. The temperature set-point is included between 17°C and 30°C (from 62 F and 86 F) with 1°C variations
anditcanbesetusingthekeys+/-onthecontrolpanelorwiththekeys▲▼ontheremotecontrol.
d. After a certain time (maximum three minutes) after the activation of the operation mode, the compressor
activates and the appliance starts delivering cold air.
3.7 TURBO COOLING MODE
• This function can be activated only from the control panel of the appliance.
a. This mode can be selected by pressing key “MODE” once or more on the control panel until the icons
and
“Turbo” appear on the display.
b. The function sets the appliance directly to cooling mode with a temperature of 17°C and maximum speed
of the fan in order to reach the set temperature more quickly.
c. In this mode it is not possible to select either the fan speed and the temperature.
d. To switch off the function, press key “MODE” on the control panel or switch off the appliance.
3.8 DEHUMIDIFICATION MODE (DRY)
a. Whenthismodeisselected,theappliancedehumidiestheenvironment.
This mode can be selected by pressing the key “MODE” once or more (on the remote control or on the
controlpanel)untilwhenthespeciciconappears:
-
on the control panel -
on the remote control display.
b. In DRY mode, it is not possible to select the fan speed or to adjust temperature.
The fan motor works at low speed.
c. Keep doors and windows closed to achieve the best dehumidifying effect.
Do not place the air outlet pipe out of a window.
d. Connect the condensation discharge pipe (paragraph 2.8)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
