Olimpia splendid UNICO EASY S1 User Manual

ENGLISH
EN - 20
b. Once the set time has passed, the appliance starts with the same settings (mode, temperature and ven-
tilation speed) as those before switching off.
c. Time can be set with 30 minutes steps up to 10 hours and with 60 minutes steps from 10 to 24 hours.
d. Starting the appliance or adjusting the timer setting to “0.0h” will cancel the programmed switching on
function.
3.11.b Programmed switching o󰀨
a. When the appliance is running, set the delayed switching off time.
- On the control panel: - press and set the switching off delay time with the keys +/-.
- To activate the function, press or wait approximately 5 seconds so that
thesettimeonthedisplaystopsashing(thedisplayreturnstoshowing
the environment temperature).
The icon lights up.
- On the remote control: - press the key “TIMER O󰀨” to access the function and then press the key
“TIMER O󰀨” once or more until the switching off delay time is set.
  - Directtheremotecontroltowardstheappliance;abeepconrmstheacti-
vation of the function.
- The icon on the control panel and the indicator “Timer O󰀨” on the remote
control display light up.
b. Once the set time has passed, the appliance switches off.
c. Time can be set with 30 minutes steps up to 10 hours and with 60 minutes steps from 10 to 24 hours.
d. Switching off the appliance or adjusting the timer setting to “0.0h” will cancel the programmed switching
off function.
3.12 OTHER FUNCTIONS
3.12.a Auto-Restart
a. If the appliance switches off due to interruption of power supply, it automatically restarts with the previous
settings when electrical power is restored.
3.12.b SLEEP function
• This function can be activated only from the remote control.
• This function is not available while the Dehumidication (DRY) and Fan Only (FAN) modes are
active.
a. When the appliance is running, press the key “SLEEP” on the remote control.
The icon appears on the control panel and on the remote control display.
.
The appliance will decrease (when cooling) or increase (when heating) the set temperature by 1°C (1 or
2 F) for 30 minutes.
b. Then, the appliance will decrease (when cooling) or increase (when heating) the set temperature by 1°C
(1 or 2 F) for an additional 30 minutes.
c. This temperature will be maintained for 7 hours before returning to the originally selected temperature.
Once this time has passed, the appliance will restart working as originally programmed.

Olimpia splendid UNICO EASY S1 Specifications

General

Type	Monobloc mobile air conditioner
Timer type	Digital
Noise level	60 dB
Hose diameter	162 mm
On/off switch	Yes
Number of speeds	3
Airflow (low speed)	335 m³/h
Airflow (high speed)	405 m³/h
Refrigerating medium	R410A
Airflow (medium speed)	370 m³/h
Cooling capacity (max)	- BTU/h
Dehumidifying capacity	2.2 l/h
Timer duration (maximum)	24 h
Air conditioner functions	Cooling, Fan, Heating
Refrigerating medium weight	515 g
Cooling capacity in watts (max)	- W
International Protection (IP) code	IPX0
Cooling capacity in watts (nominal)	2000 W
Heating capacity in watts (nominal)	1800 W
Cooling energy efficiency (EER, W/W)	2.6
Heating energy efficiency (COP, W/W)	2.7
Current	1 A
Connected load	1036 W
Power plug type	Type F (CEE 7/4)
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Energy efficiency scale	A+++ to D
Energy efficiency class (cooling)	A
Energy efficiency class (heating)	B
Annual energy consumption (cooling)	- kWh
Hourly energy consumption (cooling)	0.8 kWh
Hourly energy consumption (heating)	0.7 kWh
Control type	Touch
Display type	LED
Product color	White
Housing material	Plastic

Weight and Dimensions

Depth	276 mm
Width	665 mm
Height	693 mm
Weight	35600 g
Package depth	423 mm
Package width	865 mm
Package height	770 mm
Package weight	40900 g