Save scanned data on a USB memory
12
12-8 d-Color MF552/452/362/282/222
12.4
12.4 Save scanned data on a USB memory
Preparation required to use this function (for the administrator)
Enable to save files on a USB memory.
A file storage on a USB memory is disabled by default in order to prevent a data theft.
For system settings for USB memory operation, refer to page 17-7.
Related setting (for the administrator)
- If user authentication has been implemented, you can set permissions for every registration user and
public users to store files on a USB memory (Default: [Restrict]). For details, refer to page 17-17.
Operation flow
1 Load the original.
2 Insert a USB memory device into the USB port (close to the front panel) of the machine.
NOTICE
When this machine is starting up, do not insert or remove the USB memory device to/from the USB port.
Do not insert the USB memory device into the USB port close to the rear panel of this machine.
To Next Page
Loading...
Need help?
General
