3-14
Basic Operation
If you select [2-sided>>2-sided], press [Detail] (the Right
Select key) and you can select the binding edge of the
original.
After pressing the OK key, select the binding edge of the
finished copies.
After pressing the OK key, select the original setting
orientation.
5 Press the OK key. Completed. is displayed and the
scr
een returns to the basic screen.
6 Press the Start key. Copying begins.
When [1-sided>>2-sided] is selected, press [End Scan]
(the Right Select key) when original scanning finishes.
To Next Page
Loading...
