Olivetti d-COPIA 3013MFplus - NW Interfacesend

8-172
Default Setting (System Menu)
NW InterfaceSend
The client function such as the network authentication and the reference of user information via LDAP operates only
by the selected interface. This function is mainly used for the network system administrator. For more information
about each function, refer to Embedded Web Server RX User Guide.
1 In the Sys. Menu/Count. menu, press the  or  key to
select [System/Network], and press the OK key.
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the Right Select key).
2 The System/Network menu appears.
3 Press the  or  key to select [NW InterfaceSend].
4 Press the OK key. The NW InterfaceSend screen
appears.
5 Press the  or  key to select the desired [NIC].
Standard: standard network interface
Option NIC: optional network interface kit
6 Press the OK key. The NIC is set and the Basic menu
reappears.
Sys. Menu/Count.: a b
1 Report
2 Counter
*********************
[ Exit ]
3 System/Network
Login User Name: L b
*******************
Login Password:
[ Login ]
System/Network: a b
*********************
2 I/F Block Set.
3 Security Level
[ Exit ]
1 Network Setting
NW InterfaceSend: a b
*********************
2 Option NIC
[ Exit ]
1 *Standard