Olivetti d-COPIA 3013MFplus - Page 122

3-24
Basic Operation
13 Press [Yes] (the Left Select key). This makes a
connection with the entered destination.
If the connection is successful, Connected. is displayed
on the screen. Press [OK] (the Right Select key).
Completed. is displayed and the screen returns to the
basic screen.
If the connection failed, Cannot connect. is displayed.
Press [OK] (the Right Select key). The screen shown in
step 3 reappears. Check and re-enter the destination.
14 Press the Confirm Destination key to confirm the
r
egistered destinations.
Press [Exit] (the Right Select key) to return to the basic
screen.
15 Press the Start key. Transmission starts.
NOTE: If the screen for confirming the destination before
transmission (page 8-107) is set to [On], the Confirm
Destination screen appears when the Start key is pressed.
Dest. Confirm.: a b
*********************
[ Exit ]
H RD Center