Olivetti d-COPIA 3013MFplus - Page 220

8-12
Default Setting (System Menu)
Paper Size and Media Type Setup for Cassettes
Select paper size and media type for Cassette 1 and optional paper feeders (Cassette 2 and 3).
The available paper sizes and media types are shown in the table below.
Use the procedure below to select the paper size and media type for each cassette.
1 In the Sys. Menu/Count. menu, press the  or  key to
se
lect [Common Settings].
2 Press the OK key. The Common Settings menu appears.
3 Press the  or  key to select [Orig./Paper Set.].
4 Press the OK key. The Orig./Paper Set. menu appears.
5 Press the  or  key to select [Cassette 1 Set.],
[Cassette 2 Set.] or [Cassette 3 Set.].
Follow the steps below when you select the main unit
cassette ([Cassette 1]). Operate in a similar fashion
when you select an optional cassette ([Cassette 2 or 3])
It
em De
scription
Paper Size Letter, Legal, Statement*, Executive, Oficio II,
A4, A5, A6*, B5, Folio, 216 × 340mm, 16K, ISO
B5, Envelope C5, Custom
* Cassette 1 only
Media Type Plain (105 g/m
2
or less), Rough, Recycled,
Preprint***, Bond**, Color, Prepunched***,
Letterhead***, High Quality, Custom 1-8**
** To change to a media type other than Plain, refer to Media Type
Set on page 8-16.
*** To print on preprinted or prepunched paper or on letterhead, refer to
Special Paper Action on page 8-21.
Sys. Menu/Count.: a b
3 System/Network
4 User/Job Account
*********************
[ Exit ]
5 Common Settings
Common Settings: a b
*********************
2 Default Screen
3 Sound
[ Exit ]
1 Language
Orig./Paper Set.: a b
*********************
2 Def. Orig. Size
3 Custom PaperSize
[ Exit ]
1 Custom Orig.Size