Olivetti d-COPIA 3013MFplus - Page 274

8-66
Default Setting (System Menu)
3 Press the  or  key to select [Function Default].
4 Press the OK key. The Function Default menu appears.
5 Press the  or  key to select [Detail Setting].
6 Press the OK key. The Detail Setting menu appears.
7 Press the  or  key to select [Border Line].
8 Press the OK key. Border Line appears.
9 Press the  or  key to select [ None], [l Solid Line],
[m
Dotted Line] or [n Positioning Mark].
10 Press the OK key. Completed. is displayed and the
scr
een returns to the Detail Setting menu.
Orig. Binding
Select the default value for the binding edge of the original when [2-sided>>1-sided] or [2-sided>>2-sided] is selected
for Duplex. Items available for the default value are as follows:
Function Default: a b
*********************
2 Scan Resolution
3 FAX Resolution
[ Exit ]
1 Color Selection
Detail Setting: a b
*********************
2 4 in 1 Layout
3 Border Line
[ Exit ]
1 2 in 1 layout
Border Line: a b
*********************
2 l Solid Line
3 m Dotted Line
1 * None
Item Description
o
L
eft/Right Left/right binding
p Top Top binding