Olivetti d-COPIA 3013MFplus - Page 302

8-94
Default Setting (System Menu)
2 Press the OK key. The Printer menu appears.
3 Press the  or  key to select [CR Action].
4 Press the OK key.
5 Press the  or  key to select [CR Only], [LF and CR]
or
[Ignore CR].
6 Press the OK key. Completed. is displayed and the
s
creen returns to the Printer menu.
Job Name
Set whether the job name set in the printer driver is displayed.
Use the procedure below to specify a Job Name.
1 In the Sys. Menu/Count. menu, press the  or  key to
s
elect [Printer].
2 Press the OK key. The Printer menu appears.
3 Press the  or  key to select [Job Name].
4 Press the OK key. Job Name appears.
5 Press the  or  key to select [Off] or [On].
Printer: a b
*********************
2 EcoPrint
3 Override A4/LTR
[ Exit ]
1 Emulation Set.
CR Action: a b
*********************
2 LF and CR
3 Ignore CR
1 *CR Only
Sys. Menu/Count.: a b
5 Common Settings
6 CoPy
*********************
[ Exit ]
7 Printer
Printer: a b
*********************
2 EcoPrint
3 Override A4/LTR
[ Exit ]
1 Emulation Set.
Job Name.: a b
*********************
2 On
1 *Off