Olivetti d-COPIA 3013MFplus - Page 313

8
8-105
Default Setting (System Menu)
Setting the destination
Set the destination to which the original is forwarded.
Use the procedure below to set the destination.
1 In the Send and Forward menu, press the  or  key to
select [Destination].
2 Press the OK key. The Destination menu appears.
Confirming Current Destination
1 In the Destination menu, press the  or  key to select
[Confirmation].
2 Press the OK key. Dest. Confirm. appears.
NOTE: Press the OK key to edit/delete the current
destination.Refer to Character Entry Method on Appendix-5
for details on entering characters.
3 Press [Exit] (the Right Select key). The basic screen
reappears.
Send and Forward: a b
*********************
2 Destination
1 Forward
Destination: a b
*********************
2 Register
[ Exit ]
1 Confirmation
Destination: a b
*********************
2 Register
[ Exit ]
1 Confirmation
Dest. Confirm.: a b
**************** * **** N
[ Exit ]
p Morgan@###########