Olivetti d-COPIA 3013MFplus - Page 438

11-28
Management
4 Press the  or  key to select [Job Account. Set.].
5 Press the OK key. The Job Account. Set. menu appears.
6 Press the  or  key to select [Default Setting].
7 Press the OK key. The Default Setting menu appears.
8 Press the  or  key to select [Apply Limit].
9 Press the OK key. Apply Limit appears.
10 Press the  or  key to select [Immediately],
[Subsequently] or [Alert Only].
11 Press the OK key.
Completed. is displayed and the screen returns to the
Default Setting menu.
User/Job Account: a b
1 User Login Set.
*********************
3 Unknown ID Job
[ Exit ]
2 Job Account.Set.
Job Account.Set.: a b
*********************
2 AccountingAccess
3 Account. Report
[ Exit ]
1 Job Accounting
Default Setting: a b
*********************
2 Copy/Print Count
3 Counter Limit
[ Exit ]
1 Apply Limit
Apply Limit: a b
1 Immediately
*********************
3 Alert Only
2 *Subsequently