6
Quick Start
This section allows you to program basic cash register
features so that you can start to work right away with your
new product.
Programs and transaction information for management re-
ports are stored in the memory of the cash register which is
protected by back-up batteries.
Before beginning to program the cash register or to
perform sales transactions, insert the batteries to save
this information if a power failure occurs or if the cash
register is unplugged from the electrical outlet.
Quick Start Programming
1. Set your Language
NOTE: After you set your language the cash register will
automatically perform a reset and cancel all the programming
and transaction data stored.
1. Control lock key position: PRG.
2. Press
.
3. Press your language identifier: for Spanish,
for French, for German, for Dutch,
for Portuguese, for Danish, for
Swedish, for the new language entry, or for
English.
4. Press .
Example: Program the cash register to print in French.
Type/Press:
2. Program PLU and Electronic Journal
Capacities
Define how you wish to divide the cash register's memory
between the number of PLUs and the number of Electronic
Journal (EJ) lines available.
NOTE: Upon completion of this programming, the cash
register will automatically perform a reset and cancel all the
programming and transaction data stored, with the excep-
tion of the programmed language.
1. Control lock key position: PRG
2. Press
.
Language identifier
Hour
Minutes
Day
Month Year
3. Define how you want to divide the memory; press:
for 1,500 PLUs and 9,000 EJ lines, thus activating
the table tracking system,
for 500 PLUs and 12,000 EJ lines, thus activating
the table tracking system,
for 1,500 PLUs and 11,000 EJ lines, thus
deactivating the table tracking system,
for 500 PLUs and 13,000 EJ lines, thus deactivating
the table tracking system.
4. Press .
Example: Program the cash register memory for 1,500
PLUs and 9,000 EJ lines.
Type/Press:
3. Set the Date
1. Control lock key position: PRG.
2. Type the current date in the DDMMYY format.
3. Press .
Example: Set a date of May 25, 2005.
Type/Press:
4. Set the Time
1. Control lock key position: PRG.
2. Type the current time in the HH:MM, 24-hour format.
3. Press
.
Example: Set the time at 3:30 PM.
Type/Press:
To Next Page
Loading...
Need help?
General
