14Service Guide
Using the Fiery ES
To reboot or restart the Fiery ES
1 If necessary, press the Menu button on the printer panel and select Fiery.
2 Press the icon on the lower left corner of the printer control panel, and select Tools > Restart Server.
3 When prompted, enter the administrator password and press Login.
The default password for administrator is Fiery.1 (case-sensitive). The site administrator may have changed this
password.
4 If you reboot the whole system, select Reboot System. If you restart the Fiery server software, select Restart Server.
To force a system reboot
1 Press and hold down the power button on the Fiery ES for five seconds until the light goes out and the system powers
off.
2 Press the power button once to power on the system.
Important: If the Fiery ES is unresponsive and you cannot reboot the system from the printer, use this procedure to
force a system reboot. You should force a reboot only as a last resort, when the normal reboot method is unavailable.
To Next Page
Loading...