13Service Guide: Fiery® ES IC-420
Using the Fiery ES
2 Press the icon on the lower left corner of the printer control panel, and select Tools > Restart Server.
Figure 3: Tools screen
3 Enter the administrator password and press Login.
The default password for administrator is Fiery.1 (case-sensitive). The site administrator may have changed this
password.
4 Select Shut Down System.
Figure 4: Restart Server menu options
To force a system shutdown
• Press and hold down the power button on the Fiery ES for five seconds, until the light goes out and the system powers
off.
Important: If the Fiery ES is unresponsive and it is not possible to shut down the system from the printer, use this
procedure to force a system shutdown. Force a shutdown only as a last resort, when the normal shutdown method is
unavailable.
To Next Page
Loading...