OLS CASY TT - Operation of CASY TT; General Operation Overview; Menu Control - MAIN MENU

28
CASY TT Operator‘s Guide
General
. OPERATION OF CASY TT
. General
The CASY Instrument is operated using 13 control keys. Operation is divided into three distinct ar-
eas, each of which reects the spatial arrangement of the keys (see Figure 6).
 Entering parameters
Upper right-hand keys: MENU, CANCEL, ENTER, NEXT,
-, 
 Measurement operation and output of
results Lower right-hand keys: START, PRINT, CLEAN.
 Evaluation of the size distribution with
various cursor positions Left-hand keys: L-CURSOR,
, , R-CURSOR.
Because up to 20 device settings can be permanently stored for each measuring capillary, parameter
setting in most cases is done by selecting an appropriate setup. Each time the CASY System is
switched on, the previously used setup and the previously used measuring capillary are loaded. All
other setups are readily available through the menu function. In addition, the measuring and output
parameters can be modied to match the actual measurement and do not have to be stored in one
of the setups.
. Menu Control – MAIN MENU
All settings of the CASY System are selected with the MENU key. Pressing MENU displays the MAIN
MENU.
MAIN MENU TT-2AB-9999 15.04.2009 10:15
* Select Setup
Edit Setup
Select Capillary
Set Date and Time
System Settings
Service Menu
USE MENU TO SELECT AND PRESS ENTER TO OPEN.
USE CANCEL TO LEAVE SCREEN.
All menu control screens have the same structure. The name of the screen in upper case letters
is contained in the left part of the header, which is separated by a horizontal line: MAIN MENU.
Displayed to its right is the serial number of your CASY TT, the date and time. The lower border, also
separated by a horizontal line, contains instructions on how the screen and individual keys operate.
Use the MENU key to select individual menu items. Pressing ENTER opens a menu item. Pressing
CANCEL closes the MAIN MENU. If you overshoot the item you wish to select, you can move back-
wards by pressing and holding down the MENU key.
Irrespective of which menu control screen you are in, pressing CANCEL repeatedly returns you to the
MAIN MENU and then to the size distribution display.