OLS CASY TT - Conventions Used in this Operators Guide

7
Prologue
VII. Conventions Used in this Operator’s Guide
Text Conventions
To impart information that is consistent and memorable, the following text conventions are used in
this Operator’s Guide:
Numbered Listing Describes the steps in a procedure that must be performed in the order
listed.
Italic type Important notes and information notes are shown in italic type.
Orange italic type Refers to a dierent section in this Operator’s Guide.
Symbols
In this Operator’s Guide symbols are used as a visual signal to highlight important points.
Symbol Heading Description
WARNING This symbol is used to indicate that noncompliance with
instructions or procedures could lead to physical injury or even
death or could cause damage to the instrument.
BIOHAZARD This symbol indicates that certain precautions must be taken
when working with potentially infectious sample material.
IMPORTANT NOTE Information critical to the success of the procedure or use of
the product.
INFORMATION NOTE Additional information about the current topic or procedure.
➞
Table continued on next page.

End of table.
The following symbols appear on the instrument:
Symbol Heading Description
WEEE Electrical and electronic equipment marked with this symbol are
covered by the European Directive WEEE.
The symbol denotes that the equipment must not be disposed
o in the municipal waste system.
Conventions Used in this Operator’s Guide