Olympus BXFM - Selecting the Objective

19
BXFM
3-6 Selecting the objective
When selecting the objective, be careful not to collide with
the sample.
When the manual or coded nosepiece is combined
Turn the nosepiece to select the objective.
NOTE
1
When the motorized nosepiece is combined
Press the button of the hand switch for motorized nosepiece (BX3M-
HSRE) to select the objective.
The nosepiece rotation direction specified by pressing the
button can be changed by setting the dip switch on the side
of the FM control box (BX3M-CBFM).
Before setting the dip switch, set the main switch to
(OFF).
For settings of the dip switch, refer to the instruction manual
provided with the BX3M-CBFM.
1
TIP
a
When the motorized nosepiece and the hand switch are combined
The lighting of the OB indicator
a
of the hand switch (BX3M-HS) is
changed according to the selection of the objective.
1
1