103
Metering
6
Advanced shooting
Multi-metering
1
Turn the jog dial while holding
down and select .
• is displayed on the control panel.
2
Position the AF target mark on the
area you want to meter and press
the AEL (AE Lock) button. The
brightness is metered at up to 8
different points.
• The monitor turns on and the multi-
metering bar appears.
• Brightness meter readings are ignored after the 9th reading.
• To perform metering again, press the AEL button for more than 1
second to display . Press the AEL button again to cancel the
metering values.
Mode dial
Jog dial
Metering button
AEL button
To Next Page
Loading...
