202
10
Print setting
Trimming
This function enables you to crop part of a recorded picture and print out the
enlarged section only.
1
Press on the single-frame reservation screen to
select (trimming) and press .
“Single-frame reservation” (P.199)
2
Press to select SETUP, then
press .
• If trimming has already been set, the
screen appears. Press to select
RESET, then press .
OK : Saves the current trimming
size and returns to the single-
frame reservation screen.
RESET : Sets a new trimming size. →Go to Step 3.
CANCEL : Cancels the current trimming setting and returns to the
single-frame reservation screen.
3
Use the arrow pad, zoom lever, and
jog dial to decide the trimming
position and size.
• Press to select the trimming
frame, and press the zoom lever toward
W or T to decide the trimming size.
• Use the jog dial to select the height and
width of the trimming frame.
4
Press .
• The trimmed picture is displayed for one
second.
Mode dial
GO
SELECt
RESEt
CANCEL
OK
Zoom lever
Arrow pad
OK button
Jog dial
GO
To Next Page
Loading...
