181
9
Useful functions
Rec View
You can choose whether or not to display the picture you have just taken on
the monitor.
ON : The picture being recorded to the card is displayed. This is useful
for making a brief check of the picture you have just taken.
Pressing the shutter button halfway during Rec View lets you
resume shooting immediately.
OFF : The picture being recorded to the card is not displayed. This is
useful when you want to prepare for your next shot while the
previous picture is being recorded.
1
In the top menu, select MODE
MENU
→
→→
→
SETUP
→
→→
→
REC VIEW
→
→→
→
OFF or ON, and press .
“How to use the menus” (P.70)
• Press again to exit the menu.
• If the batteries are running low when you take a picture with the
monitor off and Rec View is set to ON, the picture may not be
displayed.
Mode dial
Arrow pad
OK button
Note
To Next Page
Loading...
