87
External flash (optional)
5
Flash
2
In the top menu, select MODE
MENU
→
→→
→
CAMERA
→
→→
→
FLASH.
“How to use the menus” (P.70)
To use the external flash only
→ Select , then press . To exit the
menu, press again.
To use the external flash together with
the main flash
→ Select IN+ , then press . To exit
the menu, press again.
3
Turn on the external flash.
• The mode for the external flash is TTL-
AUTO.
• When the shutter button is pressed
halfway, the external flash begins
communicating with the camera and
automatically switches to TTL-AUTO.
During communication, the camera’s
monitor is turned on and TTL-AUTO is
displayed.
4
Select the flash mode by turning
the jog dial while holding down .
“Flash shooting” (P.79)
• If close-up pictures are overexposed, try using the main flash by
itself.
• When the main flash and the FL-40 are used together, the main
flash is used as the compensating light source. This means that if
the amount of light from the FL-40 is insufficient (beyond its working
range), the resulting pictures may be underexposed.
Note
To Next Page
Loading...
