Disassembly and Reassembly ProcedureCLV-180
4-21
ISSUE1
(5) Take off 1 NUT (C6N3SZ, left figure) and CABLE
from BINDER
BOX bit（size 5.5 mm）
Torque driver
Tightening torque 0.6 Nm
(6) Take off 4 NUTS (C6N3SZ) and PUMP 260 ECO U
→Go to 3-4-2
BOX bit（size5.5mm）
Torque driver
Tightening torque 0.6 Nm
(7) Cut the BINDER which holds CABLE connected with
S SOCKET U, M LIMIT SWITCH, and take off
CABLE from MINI CRAMP
Nipper
C6N3SZ
To Next Page
Loading...
