Disassembly and Reassembly ProcedureCLV-180
4-25
ISSUE1
(6) Take off CONNECTOR (left figure) and CABLE
(7) Take off 1 SCREW (T2CCUK3x8SZ), LED BOARD
and LED COVER
Phillips bit (№2)
Torque driver
Tightening torque 0.3 Nm
(8) Take off SWITCH COLLAR LL, SWITCH SPRING,
MAIN SWITCH
Tweezers
3-4-2 Pump 260 eco U
(1)Cut BINDER (left figure) and take off TUBE
Nipper
T2CCUK3x8SZ
MAIN SWITCH
LED BOARD
LED COVER
SWITCH
SPRING
SWITCH
COLLAR LL
CONNECTOR
CABLE
To Next Page
Loading...
