14
CX21
Problem
Cause Remedy Page
7
7
17
17
18
17
12. Objective hits the specimen when
an objective is switched to a higher-
magnification objective.
The specimen is upside down. Set the specimen correctly with the
cover glass on the top.
The cover glass is too thick. Use a cover glass with thickness of
0.17 mm.
13. Lamp bulb does not light. Lamp bulb is not mounted. Attach a bulb.
Lamp bulb is blown. Replace the bulb.
The power cord is unplugged. Plug it securely.
14. Lamp bulb blows easily. The specified bulb is not used. Replace with a specified bulb.
To Next Page
Loading...
