Why don't the fields of view match for both eyes on my Olympus Microscope?
If the fields of view of two eyes do not match on your Olympus Microscope, it may be because the interpupillary distance is not adjusted properly. Adjust it properly. Additionally, the diopter compensation for the two eyes may not be set. Adjust it correctly.
Why won't the coarse focus raise the stage high enough on my Olympus Microscope?
If the coarse focus adjustment cannot raise the stage high enough on your Olympus Microscope, the pre-focusing knob may be limiting the stage at a low position. Raise the limiting position of the pre-focusing knob.
Why won't the coarse focus lower the stage enough on my Olympus CX31-P Microscope?
If the coarse focus adjustment cannot lower the stage low enough on your Olympus Microscope, the condenser holder may be too low. Raise the condenser holder.
Why is the coarse adjustment knob too tight on my Olympus CX31-P?
If the tension of the coarse adjustment knob is too high on your Olympus Microscope, the coarse adjustment knob rotation tension adjustment ring may be set too tight. Loosen the ring to adjust to proper tension.
Why does the lamp bulb blow easily on my Olympus CX31-P?
If the lamp bulb of your Olympus Microscope blows easily, it could be because the specified bulb is not being used. Replace it with a designated bulb.
What to do if rotating the stage makes the specimen invisible on my Olympus Microscope?
If rotating the stage renders the specimen invisible on your Olympus Microscope, the rotary stage or centering adapter for objective lens may not be centered. Center them.
General safety guidelines for using the microscope and preventing hazards.
Adjusting the main switch, light intensity, and field iris diaphragm.
Adjusting coarse focus knob tension and using the pre-focusing knob.
Diagnosing and resolving issues with image darkness, clarity, and dust.
Troubleshooting issues with focus knobs and stage movement.
Resolving problems with field of view matching and diopter settings.
Addressing specimen visibility during rotation and objective collision.
Troubleshooting lamp and power cord related problems.
General| Type | Biological Microscope |
|---|---|
| Optical System | UIS2 (Universal Infinity System) |
| Objective Lenses | 4x, 10x, 40x, 100x (oil) |
| Magnification | 40x - 1000x |
| Light Source | 6V 30W Halogen lamp |
| Power Supply | AC 100-240V, 50/60Hz |
| Nosepiece | Revolving quadruple nosepiece |
| Condenser | Abbe condenser NA 1.25 |
| Focusing Mechanism | Coaxial coarse and fine focusing |
| Illumination | Built-in transmitted illumination system |
| Observation Tube | Binocular, inclined at 30 degrees |
To Next Page
