To Next PageTo Next PageWhat to do if PC doesn't recognize Olympus DM-7?
If your PC is unable to recognize the Olympus voice recorder, make sure that when connecting to the PC, [PC] was selected. Also, ensure that the Wi-Fi ON/OFF switch of the voice recorder is set to OFF.
How to fix a blank display on Olympus DM-7?
If the Olympus Voice Recorder display is blank, it might be due to several reasons. First, ensure the battery is correctly inserted. Second, the remaining battery power may be low, so try charging it. Finally, check if the power is turned off and, if so, turn it on.
What to do if Olympus DM-7 is not working?
If you're unable to operate your Olympus Voice Recorder, there are a few potential causes. The battery might be low, so try charging it. Also, ensure the power is turned on. Finally, check if the voice recorder is in HOLD mode and, if so, release it.
How to troubleshoot inaudible playback on Olympus DM-7 Voice Recorder?
If the playback on your Olympus Voice Recorder is inaudible, check these things: Make sure the earphones are not connected to the EAR jack if you want to use the built-in speaker. Ensure that the [Speaker] setting is set to [On]. Finally, verify that the volume isn't set to [00] and adjust it accordingly.
Why is my Olympus DM-7 not recording?
If you're unable to record with your Olympus Voice Recorder, it could be due to a couple of reasons. First, check if there is remaining memory; if not, erase unneeded files. Second, the maximum number of recordable files may have been reached, so try selecting another folder.
Why won't my Olympus DM-7 battery charge?
If you're unable to charge the battery of your Olympus Voice Recorder, first, ensure you are using the specified battery (LI-50B). Second, check that the [USB Settings] is set to [Storage Class].
How to increase recording volume on Olympus DM-7 Voice Recorder?
If your Olympus Voice Recorder recordings are too quiet, it could be due to the recording level not being adjusted properly. Redo the recording after adjusting the recording level. Also, a low recording level might have been set; redo the recording after setting the recording level to [High] or [Middle].
Why does my Olympus DM-7 Voice Recorder audio sound distorted?
If the audio file sound is distorted on your Olympus Voice Recorder, it might be because the recording level hasn’t been adjusted properly. Redo the recording after adjusting the recording level. If the problem continues, adjust the output level of the connected external device.
Why is my Olympus DM-7 Voice Recorder not recording in stereo?
If an audio file is not recorded in stereo on your Olympus Voice Recorder, it could be due to several reasons. The connected external microphone might be a mono microphone, in which case sound is recorded on the left channel only. Also, check if [Rec Mode] is set to a mono recording format and, if so, set it to a stereo recording format. Finally, ensure that [Off] is selected for [Zoom Mic].
How to enable voice skip on Olympus DM-7 Voice Recorder?
If non-voice portions are not being skipped during playback on your Olympus Voice Recorder, it could be because the [Voice Detect ] process has not been performed. Use the [Voice Detect] function to extract the speech portions. Also, ensure that [On] is selected for [Voice Playback].
General| Brand | Olympus |
|---|---|
| Model | DM-7 |
| Category | Voice Recorder |
| Language | English |
Step-by-step guide to start recording audio.
Step-by-step guide to play recorded audio files.
Deleting unwanted audio files or folders.
Recording a short memo for a specific date.
Using a voice memo as an alarm.
Deleting registered voice memos.
Overview of Wi-Fi capabilities and requirements.
Guide to resolving common problems.
General guidelines for safe operation.
Warnings for hazardous environments and misuse.
Warnings about battery use, charging, and disposal.
Warnings about AC adapter use and handling.
