LCD/Sound menu [LCD/Sound Menu]
Setting the voice guidance
[Voice Guide]
This feature gives voice announcements of
recorder operating conditions. You can set voice
announcement On/Off, speed and volume.
1
Press the
+
or
–
button to select
[
On/Off
], [
Speed
] or [
Volume
].
[On/Off]:
Switches voice guidance On/Off.
[Speed]:
Sets the voice guidance speed.
[Volume]:
Sets the voice guidance volume.
2
Press the `
OK
button to move to
the respective setting.
When [
On/Off
] was selected
1 Press the + or – button to select [On]
or [Off].
[On]:
Voice guidance will be enabled.
[Off]:
Voice guidance will be canceled.
2 Press the `OK button to exit the
selection screen.
When [
Speed
] was selected
1 Press the + or – button to select the
voice speed.
[Speed1] to [Speed5]:
The greater the number, the faster the
speed.
2 Press the `OK button to exit the
selection screen.
When [
Volume
] was selected
1 Press the + or – button to select the
voice volume.
[Volume1] to [Volume5]:
The greater the number, the louder the
beep sound.
2 Press the `OK button to exit the
selection screen.
TIP
• Pressing and holding the LIST button
while the voice recorder is in stop
mode switches voice guidance On/Off.
To Next Page
Loading...
